Precautions for the use of automatic transfer vehicles (AGVs) include the following:
Safety device inspection: AGV automatic guided transport vehicles are equipped with safety devices such as emergency stop buttons, laser radars, safety PLCs, and safety speed modules. Before operation, ensure that these devices are working properly.
Battery maintenance: The battery of the AGV is a key component and requires regular charging and maintenance. Avoid using it when it is out of power or low power, and do not overcharge it for a long time to avoid damaging the battery.
Operation specification: The operator must be familiar with the vehicle condition before using the AGV, and must not allow unsupervised personnel to operate it at will. The vehicle cannot accelerate for a long time. When driving, it must slow down for a few seconds before accelerating to avoid misoperation.
Environmental adaptation: In the case of insufficient light or poor ground conditions, pay special attention to observing the instrumentation. If any abnormality is found, stop and check it immediately.
Cargo loading: Load the cargo correctly to avoid overloading or partial loading. During loading and unloading operations, it is strictly forbidden for personnel to stay under the forks, and it is not allowed to carry people on the forks.
Maintenance: Regularly check all parts of the AGV to ensure they are in good condition. Avoid using the AGV in blind spots, and do not overload or partially load the AGV.







