6T Cement Tank Trackless Transport Platform

Trackless transport platform are commonly used workshop transportation tools. It is controlled by remote control, with simple operation and sensitive operation. The running speed is generally the same as the walking speed of a person. There are emergency stop buttons installed at the four corners of the vehicle. In case of an emergency, the emergency stop button should be pressed nearby in a timely manner to stop the vehicle. After the emergency situation is resolved, the emergency stop button should be rotated clockwise to reset the current state and continue running.Front and rear laser obstacle avoidance, when there are people or obstacles on the road during operation, the vehicle slows down or stops until the personnel leave the obstacle and the vehicle returns to normal driving.

Contact us for a free consultation based on your requirements. Remarkable sells its Heavy duty Mold Transfer Cart worldwide!

In the process of using the wheel, the technical status of each part should be checked regularly,timely clean up the dust, water, oil and iron debris that may enter the machine body and take preventive measures.

The air duct of the wheel must be unobstructed, and no heat source should be placed around the driving wheel, so that problems can be found in time and take preventive measures.

Always pay attention to abnormal sound of bearing, overheated oil leakage and excessive axial and radial shaking.Deal with the problems found and replace the damaged bearings in time.

Under normal conditions, change the grease every six months.When replacing grease, clean the bearing with kerosene or gasoline first, and then fill two thirds of the bearing chamber with grease. Too much or too little grease is not conducive to lubrication.

The wheel should be regularly overhauled, usually once every three months and once a year,If the winding of driving wheel is damaged due to accident, it should be disassembled in time to analyze the cause.

5.2.4Inspection and maintenance of fasteners

After the first month of operation of the equipment, the pre tightening force of the fasteners must be checked, and then checked every six months to maintain sufficient pre tightening force of the fasteners.

Regularly clean the dust and dirt on the surface of fasteners to maintain their good appearance and performance.

When installing and removing fastene

you can click here for more ware parts maintenance details.

Industrial Transportation Solutions

 

 

Hot Tags: 6t cement tank trackless transport platform, China 6t cement tank trackless transport platform manufacturers, suppliers, factory, high quality trackless transfer cart, trackless transfer cart for expanding movement, state of the art trackless transfer cart, trackless transfer cart for steering movement, trackless transfer cart for turning movement, specific purpose trackless transfer cart